Acclaim Lighting Linear XTR, User Manual

Page: 7 / 28

5
www.acclaimlighting.com
INSTALLATION
When installing each Linear XTR fixture, ensure that the surface is level. Suitable mounting
surfaces include steel, aluminum, concrete or wood structures.
MOUNTING
Each Linear XTR is supplied with two in-built swivel
mounts which allow you to attach the fixture to
suitable surfaces.
The fixture body can be tilted in either direction from
vertical to horizontal in thirteen steps, with each step
roughly equaling 7° of rotation. Tilt gauges are located
both sides of each swivel mount. Internal ratchets in
each swivel mount ensure that the chosen angle is
retained without the need for tools.
Tilt
guage
TO MOUNT THE FIXTURE
1 Where necessary, prepare four pilot holes in the mounting surface which align with the
swivel mount base slots (see page 23).
2 Rotate both swivel mounts all the way over to allow access to the slots on one side.
3 Secure the two slots and then carefully rotate the fixture body all the way in the other
direction to gain access to the slots on the other side.
Each swivel mount base has two
slots measuring Ø0.2 x 0.39” (Ø5 x
10mm) on 1.34” (34mm) centers.
The mount bases have a thickness
of 0.12” (3mm). Select bolts or
screws (not supplied) which fit
the swivel mount base(s) correctly
and are particularly suited to the
mounting surface. Use washers
to protect the mount bases from
damage.