Acclaim Lighting Linear XTR, User Manual

Page: 4 / 28

2
www.acclaimlighting.com
INTRODUCTION
WELCOME
Welcome to the Linear XTR range from Acclaim Lighting. These aluminum bodied, IP66-
rated fixtures are available in 1’ and 4’ lengths and are easily interconnected in series to
greatly simplify installation.
Linear XTR fixtures belong to the Acclaim Lighting XTR Link™ family, which provide
additional flexibility by automatically supporting different power configurations. Linear XTR
fixtures can be powered directly by a standard mains supply (100 to 277VAC at 50 or 60Hz)
to achieve daisy-chained runs of up to 400 feet (121m). Alternatively, an optional XTR Driver
unit can be used to raise the maximum length of a single daisy-chained run to a full 700 feet
(213m).
In both 1’ and 4’ lengths, there are numerous emitter options, including multiple choices
of static white, dynamic white, RGBW or RGBA, together with an extensive range of lens
options to suit every installation.
Additionally, optional glare shields and louvers allow the light output to be shaped further.
Control is achieved using the industry standard DMX-512A format, with RDM for
configuration. DALI and 0-10V control inputs can also be used when optional converters are
employed.
SAFETY
•
When fixtures are mounted off-ground, ensure they are securely fitted to an appropriate
mounting surface.
•
Ensure that the power input is supplied from an environmentally protected location, is
correctly fused and has a
valid protective earth that is tied to true earth
.
WARNING - HIGH VOLTAGE
This device can use high voltages (up to 400VDC) which could
cause severe personal injury or death if misused:
• Always
isolate power before connecting or disconnecting links.
• Installation to be carried out by certified electricians only.
•
Use only
approved
cables and connectors.
• Check all connections are correctly made before energizing.
HIGH VOLTAGE
MAINTENANCE
CAUTION: Always isolate mains power before starting maintenance operations.
•
Ensure that all mounting (and device) screws/bolts are fully tight and free of corrosion.
•
Ensure there is no deformation to the housing, lenses or fixing points.
•
Check that all power supply cables are free from physical damage or material fatigue.
•
Use only genuine spare parts supplied by Acclaim Lighting.
CLEANING
•
Use a moist, lint-free cloth along with warm water when cleaning each fixture.
•
Never use alcohol or solvents.
SAFETY, MAINTENANCE AND CLEANING