Acclaim Lighting Linear XTR, User Manual

Page: 8 / 28

6
www.acclaimlighting.com
USING OPTIONAL EXTENDER BARS
Optional extender bars are available to allow each Linear XTR fixture to be held a certain
distance from a vertical mounting surface. Three extender bar lengths are available
(see page 3 for part numbers and page 24 for dimensions). Each extender bar is
manufactured entirely from aluminum to minimize weight and each Linear XTR fixture
requires two extender bars of equal length.
There are four Ø0.26” (Ø6.5mm) holes in the backplate to allow for secure attachment to
the mounting surface. Suitably sized wall screws should be chosen based on the mounting
surface.
TO MOUNT THE FIXTURE
1 Rotate both swivel mounts all the way over to allow access to the slots on one side.
2 Secure the two accessible slots to each extender bar using the supplied bolts/washers
(see note below) and then carefully rotate the fixture body all the way in the other
direction to gain access to the slots on the other side.
Swivel
mount
base
Always place the spring
washer on each bolt first
and then add the standard
washer, before inserting into
the swivel mount base. This
will prevent the steel spring
washer from denting the
softer aluminum body of the
swivel mount base.
Do not overtighten.