Chapter 4 Configuration
Installation and Operation Manual
4-18
Configuring for Operation ASMi-54
Ver.
1.0
Using the Static MAC Table
Static MAC addresses are stored in the MAC table.
To add a static MAC address:
1. Select
Main
Menu>Configuration>Applications> Bridge.
The Bridge screen appears (see
Figure 4-20
).
2. Select
Static MAC Table.
The Static MAC Table screen appears (see
Figure 4-21
), with VLAN ID
entries for a VLAN-aware bridge only.
3. To add a static MAC address, press A (Add Entry).
The Static MAC Table screen display changes, as shown in
Figure 4-22
.
4. In Add mode, perform the following:
1. Select
MAC Address, and enter a new MAC address.
2. Select
VLAN ID, and choose a VLAN ID for the MAC address, 1-4094.
3. Select
Receive Bridge Port, and choose the interface this MAC address
should be attached to.
4. Press
<S> to save the MAC address.
5. Press
<ESC> to return to the Static MAC Table screen.
5. Return to the Static MAC Table screen and press <S> to save the table.
ASMi-54
Configuration > Applications > Bridge > Static MAC Table
VLAN ID MAC address Receive Bridge port
1 1 11-11-11-11-11-11 1
| 2 1 22-22-22-22-22-22 2
v 3 2 33-33-33-33-33-33 3
4 3 44-44-44-44-44-44 3
5 4 55-55-55-55-55-55 5
1. MAC address … (11-11-11-11-11-11)
C – Clears the table ; S – Save ; A – Add entry
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-21. Static MAC Table Screen
Summary of Contents for RAD ASMi-54
