![background image](http://html.mh-extra.com/html/access/rad-asmi-54/rad-asmi-54_installation-and-operation-manual_455266060.webp)
Chapter 4 Configuration
Installation and Operation Manual
4-10
Configuring for Operation ASMi-54
Ver.
1.0
Configuring the Fast Ethernet Port
The following parameters can be configured for the Ethernet ports at the physical
level:
•
Administrative Status
•
Autonegotiation
•
Flow Control
•
Maximum advertised capability for autonegotiation procedure
•
Data rate and duplex mode (only when autonegotiation is disabled)
•
MDIX Auto Cross Over.
To configure the Fast Ethernet port:
1. Select
Main
Menu>Configuration.
The Configuration screen appears (see
Figure 4-1
).
2. Select
Physical Layer.
The Physical Layer screen appears (see
Figure 4-14
).
3. Select
Fast Ethernet.
The Fast Ethernet Port Configuration screen appears (see
Figure 4-15
).
The parameters are described in
Table 4-2
.
4. Press
<S> to save the changes.
ASMi-54
Main Menu > Configuration > Physical Layer
1. Ethernet >
2. SHDSL >
>
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-14. Physical Layer Screen
Summary of Contents for RAD ASMi-54
