Chapter 5 Configuring Typical Applications
Installation and Operation Manual
5-4
Configuring the Bridge
ASMi-54 Ver. 1.0
Defining the Bridge
Defines the Bridge entity.
To define the bridge:
1. Open the Bridge menu (Main>Configuration>Application>Bridge).
2. Define the bridge parameters. See
Configuring the Internal Bridge
for more
information on each of the parameters.
Defining VLANs
Define the required VLAN and add to it the relevant bridge ports.
To define a VLAN:
1. In the Bridge menu, select VLAN members to open the VLAN membership
configuration menu.
2. Leave the parameters at their default settings (VLAN-Unaware).
To define and create a new VLAN, see
Configuring the Internal Bridge
for
more information.
3. Add the relevant ports to the defined VLAN (including the Host bridge port if
it is the VLAN used for management).
Defining Bridge Ports
The unit is supplied with the Bridge Ports preconfigured for basic use and do not
need to be reconfigured. The factory set configuration is shown in
Table 5-1
. To
reconfigure the ports, the configuration for each port must first be deleted. See
Chapter 4, Configuring the Bridge Ports
for more details.
Table 5-1. Factory Set Bridge Port Settings
Bridge Port Configured to
1
Reserved for management host; appears after
providing the host with the IP address.
2
Fast Ethernet Port 1
3
Fast Ethernet Port 2
4
Fast Ethernet Port 3
5
Fast Ethernet Port 4
6
PCS Port 1
Summary of Contents for RAD ASMi-54
