37
4-5. Moving the helicopter with the T1H3 tug
Use the joystick on the remote control to move the helicopter. Below are several
notes to be aware of while you are moving the helicopter.
1. Carefully watch the position of the tail and rotors of the helicopter while moving.
2. When turning the tail of the helicopter can swing much faster then the expected.
3. When going up a slope make sure the center of gravity is far enough forward to pre-
vent the tail from falling.
4. Do not make any sudden start or stop maneuvers.
5. If either side of the tug starts beeping then it is a “Low Battery” indication. Either swap
out batteries with fresh charged ones or reconnect the chargers to the tug to recharge
them.
6. Try and make gradual turns to extend the life of the tracks.
7. Watch the castering wheels to ensure they are always leaning in the proper direction.
