33
4. Ensure the position on your transmitter is set to engage mode. Slowly move the tug
forward and backwards until you visually confi rm the rollers on the cradle are fully en-
gaged and are turning when the tug moves. Approach the skids slowly and align your
tug so the skids on your helicopter are centered onto the rollers as pictured below.
Slowly advance forward/load helicopter while maintaining the skids centered as much
as possible. If skids go off center adjust position by turning either left or right until cen-
tered once again.
Forward/Loading
Forward/Loading
Backwards/Unloading
Backwards/Unloading
Left Cradle
Right Cradle
Gear Box
Gear Box
*NOTE*
Rollers should always turn opposite of Tug direction
Center
Center
Turning Left will
adjust the skids
to the right
Turning Right will
adjust the skids
to the Left
Operator Point of View
Skids
