29
4. After lifting the tugs off of the ground for any reason or taking it in and out of your trans-
portation vehicle, you must check to make sure that the sprockets are correctly seated
on the tracks. If the sprocket is not properly seated it could result in damage to the
track.
5. Visually check tracks for wear on the treads and wear on the inner plastic surfaces.
Also inspect for damaged or missing rotoclips as a result of driving over small rocks.
Damaged treads should be replaced before operating the tug.
6. It is recommended to operate the tug without loading the helicopter to become famil-
iarized with the tug’s functionality.
Check sprockets for proper seating and alignment.
