27
4-1. Radio Operation
4. Tug Operation
1. Switch the radio on and make sure the power indicator light turns on and the radio
beeps once. If this does not happen, check to make sure the batteries were installed
correctly. When the battery level in the radio becomes low the radio will begin to beep,
signaling you to replace or recharge the batteries.
2. To drive the tug, move the control stick in the desired direction.
3. The Roller Engage, Lock & Free Roll Switch is a 3 position switch. The Roller Engage
position is used to drive the cradle rollers when loading and unloading the helicopter.
The Lock position is to lock the rollers from turning after the helicopter is loaded on the
tug. Free Roll is for manual unloading only.
Forward/Loading
Reverse/Unloading
Right
Left
ON/OFF
Power Switch
Roller Engage, Lock, and
Free Roll Position Switch
Engaged
- Free Roll
Locked
3 Position Speed
Toggle
Fast
- Moderate
Slow
Light Switch
(Optional)
Forward
Reverse
