30
4-3. Adjusting the Width of the T1H3 Tug
Skid Width Measurement
Edge to Inside Edge
Center to Center
1. Use the front and back cranks to adjust the width between the right side and left side
tugs. Use the numbers on the extension tubes as reference for getting the front and
back connecting tubes set at equal lengths.
HINT #1: Use a tape measure to measure the Center to Center distance of the skids and
then use the tape measure to set the tug width.
HINT #2: Use two people adjusting the two cranks at the same time to speed up the pro-
cess.
Front Crank
Back Crank
