Internal HDD
60
Internal HDD
The internal hard disk drive (HDD) is very sensitive. Op-
erate the device according to the following instructions in
order to avoid drive errors. Important recordings should
be backed up on external media to avoid unexpected
data loss.
Note
•
Do not move the device during operation.
•
Moisture inside the device can condense and
lead to HDD malfunctions.
•
When the device is turned on, never remove the
mains plug from the socket or interrupt the
power supply using the safety switch.
•
Do not move the device immediately after
switching it off. To move the device, carry out
the following steps:
1. Wait until OFF has been shown on the display
for at least two minutes.
2. Remove the mains plug from the socket.
3. Move the device.
•
Data on the HDD can be lost in the event of a
power failure during operation. Use an uninter-
ruptible power supply (UPS)!
•
The HDD is very sensitive. Improper use or un-
suitable surroundings can damage the HDD af-
ter some years of use. This may be indicated by
the playback stopping unexpectedly or visible
“mosaic” effects in the image. In some circum-
stances, there are no prior signs of a HDD mal-
function.
•
In the event of a malfunction, no recordings can
be played. The HDD must be replaced in this
case.
