PTZ control
22
Pattern settings
Patterns are defined tours from position to position that
are accessed in sequence on the PTZ camera. Patterns
are recorded almost live. The system saves the parame-
ters used whilst you move and adjust the cameras in se-
quence to the corresponding positions at a defined
speed.
•
Select PTZ in the menu and click on Pattern Settings:
1. Click on Rec Pattern to start the pattern recording.
2. Using the control panel, adjust the camera position
and settings that you wish to record as a pattern.
3. The recording is made until you right-click to finish
the recording.
Note
•
Start the recorded pattern by calling up the
pop-up menu (right-click in the live view of the
PTZ camera).
•
Click on Set Pattern and click on the desired
pattern. The PTZ camera now starts moving to
the individual positions. After running through
the entire pattern, the process is started again.
