System operation
12
System operation
General information
The device can be controlled as follows:
•
By remote control
•
Using the USB mouse
Operating elements on the device
Note
Pay attention to the overview on page 3.
No.
Name
Function
1
Power LED
Lights up blue when the system is switched on
2
IR receiver
For the remote control
3
REC LED
Lights up red during recording
4
HDD LED
Flashes blue when the HDD is accessed
5
Network LED
Lights up red when the network is accessed
6
Alarm LED
Lights up red in the event of an alarm
Connections on the rear of the device
Note
Pay attention to the overview on page 3.
No.
Name
Function
7
USB port
•
To connect a USB mouse
•
To connect a USB stick for data backups
8
VIDEO IN
: BNC inputs
9
VIDEO OUT 1:
BNC monitor output
VIDEO OUT 2:
BNC spot monitor output
10
AUDIO IN:
Cinch audio input
AUDIO OUT:
Cinch audio output
11
LAN:
10/100 MBit Ethernet LAN connection
12
VGA:
VGA monitor output
13
ALARM IN:
•
Alarm input 1–4
•
G = Ground
ALARM OUT:
•
Relay output and ground
RS-485:
•
Connection for PTZ cameras
14 12 V DC power socket
15
Power switch
16 Connection for grounding
