Abit Siluro GF4 MX Series, User Manual

Page: 75 / 82

Utility Setup 5-15
The following commands are for the NVIDIA Flash ROM programming utility V4.38,
for your reference only.
NVIDIA Flash ROM utility v4.38 Command List:
Usage:
nvflash [commands] [rom filename]
file f <filename> Flash the ROM using <filename> (no confirmation), then do
compare and ~CRC32.
save b <filename> Read ROM and save to <filename>.
compare k <filename> Read ROM and compare with <filename>.
tv x <filename> Transfer TV data from file to EEPROM.
version v <filename> Display file version and ~CRC32 (if no filename, acts on ROM).
erase e Erase the ROM.
display d [bytes] Display 256 the first bytes of the EEPROM (default is 256 bytes)
check c Check for supported EEPROM.
nolight l Don't light keyboard LEDs.
overridetype p Don't pause if file & chip PCI VenID/DevID mismatch.
overridesub u Don't pause if file & chip PCI subsystem ID mismatch.
reboot y Reboot the PC after other tasks completed.
protecton w Write protect ROM (only works on some ROMs).
protectoff r Remove ROM Write protect. (only works on some ROMs).
straps m<straps> Change soft straps
format is: AND Mask 0, OR Mask 0, AND Mask 1, OR Mask 1
keepstraps g Keep the soft straps already present in the EEPROM after
flashing the new image.
romstrap j Override the ROM strap setting to allow flashing an image when
grounding the STRAP_SUB_VENDOR pin. This allows flashing
a corrupted or erased EEPROM.
Note: Make sure there is a physical EEPROM present when using
this option
guid q<guid> Set the IEEE 1394 GUID in the ROM image (GUID is in the form
of 16 hex digits).
guidsource 1<location> Set the source of the IEEE 1394 GUID.
main - main EEPROM image
dedicated - separate serial EEPROM part
list a List all NVIDIA display adapters found in the system.
index i <index> Force a specific device index.
help ? Display this screen.
silence s <level> Silence level:
default All beeps.
#=4 (or 2) No progress beeps.
#=5 (or 1) No beeps.
User’s Manual
All manuals and user guides at all-guides.com