Abit AB-BF6 Manual Download Page 26

Page: 26 / 106

2-16

Chapter2

BF6

KBM Upper: PS/2 Mouse Connector

Attach a PS/2 mouse to this 6-pin Din-

connector.

USB Port Connectors

This motherboard provides two USB ports.

Attach the USB connector from the

individual device to these connectors. You

can attach USB devices such as a, scanner,

monitor, mouse, keyboard, hub, CD-ROM,

joystick etc. to one of each USB connector.

You must make sure your operating system supports this feature and you may need to install

an additional driver for individual devices. Please refer to your device user’s manual for

detailed information.

Serial Port COM1 and COM2 Connector

This motherboard provides two COM ports,

you can connect an external modem, mouse

or other devices that support this

communication protocol.

Parallel Port Connector

This parallel port is also called an “LPT”

port, because it usually connects to the

printer. You can connect other devices that

support this communication protocol, like a

scanner, M.O. drive, etc.

Summary of Contents for AB-BF6











































































































Search results

Summary of Contents for AB-BF6

Reviews:

Related manuals for AB-BF6

Brands by name

Popular brands

Abit AB-BF6, Manual

Search results

Summary of Contents for AB-BF6

Reviews:

Related manuals for AB-BF6

Brands by name

Popular brands