![Abilia Lightwriter SL50 User Manual Download Page 31](http://html1.mh-extra.com/html/abilia/lightwriter-sl50/lightwriter-sl50_user-manual_451678031.webp)
31
REMOVING A KEYGUARD
1.
Place your Lightwriter on a table or flat
surface, and turn it off by pressing
Shift
then
Power
. Using the screwdriver supplied with
your Lightwriter, undo the two screws on
either side of your keyboard. Keep these
safe as you will need them again.
2.
Once you have removed the screws, insert
the keyguard release tool into the right-
hand leverage point at the bottom of your
keyguard. The curve of the keyguard release
tool should be towards you, so that it fits
into the curve of the leverage point. Gently
push the tool downwards so that the
keyguard is being lifted off your Lightwriter.
You will hear or feel a gentle click as it is
released.
3.
Repeat step 2 with the left-hand and central
leverage points until the front of your
keyguard is free from the Lightwriter. If it is
still a bit stiff, use the keyguard release tool
in each of the leverage points again.
4.
Once it is loose, gently hold the bottom
edge of your keyguard and pull it up and
forward, away from your Lightwriter. If any of
the keys become loose when you remove
the keyguard, simply press them back in to
place on the rubber mat. Make sure they are
seated securely.
www.sentient-healthcare.ie