Regular Maintenance
DAILY MAINTENANCE
• Operate filter for at least 4 hours per day (on systems without a Stealth System or Tidal Wave System).
• Test pH and adjust to between 7.2 and 7.6.
• Test chlorine or bromine level and adjust.
• Re-test again each day for one week if the hot tub has just been refilled.
WEEKLY TREATMENT:
• Shock water as per instructions on hot tub shock table.
• Clean any oil and grease from water line, if present.
• Remove and clean filter (if necessary) by spraying with garden hose
• (see “Cleaning the Filter”).
• Depending on use, Filter Clean may be required.
GENERAL MAINTENANCE AND CARE:
• Every 3 to 4 weeks clean filter with Filter Clean*.
• Change water at least every 90 days.
• Periodically clean and protect vinyl cover with a vinyl cleaner.
• Test kits – rinse vials after each use.
• Replace reagents annually and store in dark cool place.
• Test total alkalinity monthly.
*This will vary greatly with frequency of hot tub usage, bather load, etc.
WARNING: Failure to adhere to regular maintenance procedures will lead to improper water
balance which will in turn contribute to the failure of the:
• heater element
• pump seal
• pressure switch
• coupling seals
• hot tub pillows
This will not be covered under warranty.
54
PA C I F I C H O T T U B S O W N E R ’ S M A N U A L
Summary of Contents for Pacific 2004
