Aber Hot Tub Manufacturing Pacific 2004, User Manual

Page: 43 / 58

Factory Programming
PHT 2004 ULX Controls
(ULXT models)
1.1 Economy switch
Functionality When economy mode is set, the pack regulates the water temperature 20°C
below the actual set point. Press Economy button and follow sequence.
Sequence 1st press 2nd press
Display ON OFF
Default OFF
Logo or arrow the display will toggle between the actual water temp and “Econ”.
1.2 Clock key
Functionality Allows user to display and modify the real time clock.
Sequence Touch key Hold key for 5 secs. 2nd press 3rd press
Display & Displays time for The hours blink. Minutes blink. Save & Exit.
Settings 5 seconds. Use up & down Use up & down
keys to set hours. keys to set minutes.
Default 12:00 – Flashing on power reset.
1.3 Program key
Functionality Press and hold the Program switch until the program icon lights up (about 2 seconds),
1st parameter will appear (Up/Down keys modify values)
Duration Press Program key to display next parameter, System will reset after last parameter
Display As table below
Parameter Display Value of x
Time of day xx:xx 00:00 to 11:59 (AM/PM)
Filter Cycle start time FS xx 1 to 12
Filter Cycle duration Fd xx 0 to 12
Temperature unit Tu x (F or C)
Keypad Unlock or Lock ULOC ULOC
LOC LOC
Note 1: At any time during the programming, if the user does not touch the keypad for more than 10 seconds,
the unit will exit the programming mode and go back to the normal display. Any changes done so far are saved.
Note 2: Even if the Filter cycle is always on, the Pump #2 and Blower outputs (if installed) will be purged at the
Filter Start hour (ie. twice a day).
44
PA C I F I C H O T T U B S O W N E R ’ S M A N U A L