5. Press
Enter
key to confirm the new setting.
The spa side control will return to normal mode.
To set the duration of the cycle:
1. Enter the programming mode by pressing
Program
key.
2. Select the Filter cycle duration parameter by pressing
List
key until “FIdu” is displayed.
3. Press
Enter
key to display the current setting.
4. Use
Up
or
Down
arrow key to change setting.
5. Press
Enter
key to confirm the new setting.
The spa side control will return to normal mode.
Keypad lockout
This function allows you to prevent unauthorized parameter setting of the unit. The basic functions of the spa
will remain accessible (pump, blower and light outputs) but it will be impossible to change the temperature
Set Point, to override the Economy mode or to enter the programming mode.
When the keypad is locked, the "Lock" icon will be displayed.
To lock the keypad:
1. Enter the programming mode by pressing
Program
key.
2. Select the Keypad lockout parameter by pressing
List
key until “Loc” is displayed.
3. Press
Enter
key to display the current setting.
4. Use
Up
or
Down
arrow key to change setting.
5. Press
Enter
key to confirm the new setting.
The spa side control will return to normal mode, with keypad locked, and the "Lock" icon will be displayed.
To unlock the keypad:
1. Enter the programming mode by pressing
Program
key. “Loc” is displayed.
2. Press
Up
arrow key.
3. Press
Pump 1
key.
4. Press
Light
key.
The “Lock” icon will disappear and the spa side control will return to normal mode.
If the unlock process takes more than 15 seconds, the spaside control will return to normal mode but the
keypad will remain locked.
Temperature unit
Water temperature can be displayed in °F or °C.
To select the temperature display unit:
1. Enter the programming mode by pressing
Program
key.
2. Select the Temperature unit parameter by pressing
List
key until “Tu” is displayed.
3. Press
Enter
key to display the current setting.
4. Use
Up
or
Down
arrow key to change setting.
5. Press
Enter
key to confirm the new setting.
The spa side control will return to normal mode.
Starting Pump 1:
Press
Pump 1
to turn Pump 1 on at low speed. Press a second time to turn Pump 1 to high speed. A third time
37
PA C I F I C H O T T U B S O W N E R ’ S M A N U A L
Summary of Contents for Pacific 2004
