4
Zenith Automatic Transfer Switch | new.abb.com/low-voltage
Hazard Categories
The following important highlighted information appears
throughout this document to warn of potential hazards or
Carefully read all instructions and become familiar
with the devices before trying to install, operate,
service or maintain this equipment.
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Failure to comply with these instructions
may result in product damage.
Indicates important information that must be
remembered and aids in job performance.
NOTICE
WARNING
WARNING
Warranty
This document is based on information available at the
time of
to ensure accuracy, the information contained herein
does not cover all details or variations in hardware
and software, nor does it provide for every possible
contingency in connection with installation, operation,
and maintenance. Features may be described herein that
are not present in all hardware and software systems.
ABB Zenith Controls assumes no obligation of notice to holders
of this document with respect to changes subsequently made.
ABB Zenith Controls makes no representation or warranty,
expressed, implied, or statutory, with respect to, and assumes
usefulness of the information contained herein. No warrantees
is required concerning any aspect of the Automatic
Transfer Switch operation or maintenance.
Section 1: General Information
Warranty Period:
The Warranty Period for ZTE, ZTS, ZTG, and ZT30
Series transfer switch Products is twenty-four (24)
months from the date of shipment.
Notes: This warranty is valid only in the United States and for
Replacement parts are warranted for a period of ninety
(90) days when installed by an authorized seller factory or
authorized seller service station.
WARNING
CAUTION
NOTICE
DANGER
