ABB | SACE Tmax XT
Ekip Touch - Interface and menus | 5 - Changing parameters and commands
39 | © 2020 ABB | 1SDH001821A1002 - ECN000135670
5 - Changing parameters and commands
Changing parameters
Comply with the following procedure to change one or more parameters:
IMPORTANT: parameters can be changed with Trip unit in the Local mode and in the
absence of timing alarms
1. Select parameter and enter PIN if required
2. Select new value from list or with the aid of page commands
3. Select Confirm command if present:
Figure 22
4. When the new value has been selected/confirmed, the menu of the parameter is accessed automatically,
the changed item presents the new value in light blue and a tick to confirm:
Figure 23
Now proceed by confirming the programming (Step 5)
or access other parameters
and make further changes (Step 1).
Select the arrow at the top left to access the top menu until the
Programming
page appears:
Figure 24
6. Various commands are enabled in the programming page:
•
Confirm
to validate the new parameters and conclude the programming procedure
•
Abort
to interrupt the save data process
•
Modify
to go back to the menus and change the parameter or others
Figure 25
