ABB | SACE Tmax XT
32 | © 2020 ABB | 1SDH001821A1002 - ECN000135670
Ekip Touch - Interface and menus | 3 - Graphic pages
Measurements
Figure 18
If provided for by Trip unit model, the
Measurements
pages contain a list of measurements acquired in real
time, expressed in absolute value:
Page
Name
Measurements
1
Current
Currents: phase, earth fault, external/Rc earth fault
2
Voltage
Voltages: line-to-line, phase, neutral
3
Active power
Phase and total active powers
4
Reactive power
Phase and total reactive powers
5
Apparent power
Phase and total apparent powers
6
Energy counters
Total active, reactive and apparent energies
7
Ekip Signalling 3T
Summary of
Ekip Signalling 3T
module measurements, if present
Ekip Touch configuration involves certain exceptions:
• the Ne current measurements are available with 4P and 3P + N configurations
• the phase voltage measurements are available with the 4P and 3P + active external neutral voltage
configuration
• with the 3P configuration, pages:
Active Power, Reactive Power and Apparent Power
are replaced by the
Powers
page with the total active, reactive and apparent power measurements
• Ige/Rc current available with external toroid activated
Press the sides of the display to browse the pages; press the
HOME
key to quit.
NOTE: each page can be set as the main page by pressing HOME
, holding it for five
seconds and confirming the message on the display
