ABB XSeries G4 6200, User Manual, Page: 76 / 168

Page 3
–14
2104349 rev. AD
Description Format Note
Date MM/DD/YY Must enter 2 digits each
Time HH:MM:SS 24-hour clock
3.3.2 Station ID
The station identifier code should uniquely identify one G4 EX from that of any
others.
Description Format Note
Station ID XXXXXXXXXX 10-digit alphanumeric
3.3.3 Location
The location field can hold up to 24 alphanumeric characters to describe its
location. An example would be the lease name, county name or road number.
Description Format Note
Station ID XXXXXXXXXXXXXXXXXXXXXXXX 24-digit alphanumeric
There are additional fields stored in WinCCU for uniquely
identifying the meter, including fields for entering the lease
holder, producer, operator and buyer. These fields reside on
the host computer in the ID Manager not in the G4 EX.
3.4 Security system
Data and configuration security in the G4 EX is spread across three elements: the
flow meter, PCCU32 and WinCCU32. Currently, there are three types of security
that are possible:
- Device enforced legacy level 1-2 security
- WinCCU enforced legacy security
- Device and PCCU32 enforced Role Based Access Control (RBAC) security
The following sections will cover these security options.
3.4.1 Device legacy bi-level security
The G4 EX has a security switch (S2) on the termination board. Password security
is bi-level: read only (security code level 1) or read/write (security code level 2). To
establish meter security, the user must have the security switch in the OFF
position, and locally connect with PCCU32. Enter a four digit number level 1 and
level 2 security code, and click Send.
3.4.1.1
Establishing meter security
To establish a meter security, the user must have the security switch in the OFF
position, and locally connect with PCCU32.
1) Enter a four digit number for level 1 and level 2 security codes (see Figure
3
–14), and click Send.
2) Turning the security switch (S2) ON will activate the security codes.