ABB XSeries G4 6200, User Manual, Page: 70 / 168

Page 3
–8
2104349 rev. AD
2) In PCCU32 Entry mode, select Communications from the tree-view. Upon
selection, click on the Network tab (see Figure 3
–8).
Figure 3
–8 Network tab
3) The user will need to enter a Network ID, and set the Enable DHCP
parameter field value to Yes. The other fields within the tab will auto-
populate. Click the Send button.
4) Next, the user will need to locate the Totalflow
– TCP selection under
Communications in the PCCU32 tree-view (see Figure 3
–9
). Once selected,
the user is taken to the Setup tab. In this tab, the user needs to set the
Protocol parameter value to Totalflow/TCP. When done, click the Send
button.