ABB XSeries G4 6200, User Manual, Page: 10 / 168

Page x 2104349
– rev. AD
Introduction
This manual is designed to provide an experienced flow meter technician with the
requirements necessary to install, set up and operate a Totalflow XFCG4
6200/6201EX.
Organization & style
Each of the chapters in this manual presents information in an organized and
concise manner. Readers are able to look at the headings and receive a broad
picture of the content without reading every word. Also, there are overviews at the
beginning of each chapter that provides the user with an idea of what is in the
chapter and how it fits into the overall manual.
Readers will also note that each heading level number is formatted to include the
chapter, section, and subsection numbers. E.g. 4.15.2 indicates that the reader is
reading subsection 2 of section 15 in chapter 4.
Getting help
At Totalflow, we take pride in the ongoing support we provide our customers.
When you purchase a product, you receive documentation which should answer
your questions; however, Totalflow Technical Support provides you an 800
number as an added source of information.
If you require assistance, call:
USA: (800) 442-3097 International: 001-918-338-4888
Before you call
-
Know your Totalflow’s model and serial number. Serial numbers can be
found on a plate located on each unit.
- Be prepared to give the customer service representative a detailed
description of the problem.
- Note any alarms or messages as they appear.
- Prepare a written description of problem.
- Know your software version, board and optional part numbers.
Key symbols
The following symbols may be used frequently in this manual. These are intended
to catch your eye and draw your attention to important information.
Intended to draw your attention to useful information or to
clarify a statement made earlier.
Intended to draw your attention to a fact that may be useful or
helpful in understanding a concept.