ABB TZIDC-110, Short Manual

Page: 5 / 44

Safety and precautions
41/18-77 EN Safety and precautions 1
1 Safety and precautions
1.1 General
Proper and safe operation of the TZID-C110 positioner requires:
• proper transportation and storage
• installation and commissioning by qualified
personnel
• correct operation according to the instructions in this manual
• proper use (see chapter 1.4 on page 2)
• careful maintenance
Only qualified personnel are allowed to work on the device (see chapter 1.5 on page 3).
Observe
• the present operating instructions
• the relevant safety regulations and standards for the installation and operation of
electrical systems
• the standards, regulations and directives governing explosion protection, when using
intrinsically safe devices
The regulations, standards and directives referred to in these operating instructions are
applicable in Germany. When using the TZID-C110 positioner outside the German Fed-
eral jurisdiction, the relevant regulations, standards and directives applicable in the coun-
try where the device is used must be observed.
The TZID-C110 positioner has been designed and tested in accordance with DIN VDE
0411 Part 1.
Safety Requirements for Electronic Measuring Apparatuses
(based on IEC Publication 348) and has been supplied in a safe condition.
The present operating instructions contain warnings and cautions marked with a symbol
(see chapter 1.2). The instructions given in these sections must be observed to retain the
device in a safe condition and to ensure safe operation. Otherwise, persons can be
endangered or the device itself or other devices or equipment may be damaged or fail.
Important instructions for your safety!
Read and observe!
Caution