ABB TZIDC-110, Short Manual

Page: 25 / 44

Installing and commissioning
41/18-77 EN Installing and commissioning 21
• Press the or button to increment or decrement the bus address.
• Press and hold
ENTER
until the countdown has run down from 3 to 0. Then release
ENTER
. The new bus address is saved.
• Press and hold
MODE
. Additionally press or until
is displayed. Set the parameter to NV_SAVE by using or .
• Press and hold
ENTER
until the countdown has run down from 3 to 0 to switch the
positioner back to the operating level.
• To return from the operating level to the remote level, press and hold
MODE
and
ENTER
simultaneously until the countdown has run down from 3.0. Release
MODE
and
ENTER
. The positioner returns to the remote level.
3.4.3 Overview of the operating modes and how to select (from operating level)
Mode 1.1: Control
• Press and hold
MODE
.
• Additionally briefly press as often as required.
• is displayed.
• Release
MODE
• is displayed, control is running.
Mode 1.2: Manual adjustment within the stroke range
• Press and hold
MODE
.
• Additionally briefly press as often as required.
• is displayed.
• Release
MODE
.
• is displayed.
• Press or to adjust the position within the stroke range.
conf
mA
%
C °
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C
°