ABB TZIDC-110, Short Manual

Page: 27 / 44

Installing and commissioning
41/18-77 EN Installing and commissioning 23
- Release
MODE
and
ENTER
.
- is displayed.
4. Select parameter 3.2 "Zero position”:
- Press and hold
MODE
.
- In addition, 2 x briefly press .
- is displayed.
- Release
MODE
.
5. Change parameter setting:
- Briefly press to select "CTCLOCKW".
6. Change over to parameter 3.3 "EXIT" and save the new setting:
- Press and hold
MODE
.
- In addition, 1 x briefly press .
- is displayed.
- Release
MODE
.
- Briefly press to select "NV_SAVE.
- Press and hold
ENTER
until the displayed countdown from 3 to 0 has run down.
The positioner saves the new settings and automatically returns to the operating level.
7. Return to the remote level.
- Press and hold
MODE
and
ENTER
.
- Wait until the countdown has run down from 3 to 0 .
- Release
MODE
and
ENTER
.
The display indicates the position in % and REMOTE.
See Appendix A for an overview of the operation and the parameter settings.
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C °