ABB TZIDC-110, Short Manual

Page: 7 / 44

Manufacturer’s information
41/18-77 EN Manufacturer’s information 3
1.5 Qualified personnel
Only those persons familiar with the installation, commissioning, operation and mainte-
nance of the TZID-C110 positioner or similar instruments and who have the required
qualification are authorized to work on the device.
These persons are:
• Project specialists who are familiar with the security concepts of process automation.
• Commissioning and service personnel, i.e. persons who have been trained ade-
quately to mount, commission, repair, and maintain the TZID-C110 positioner or sim-
ilar automation instruments or who are – according to safety standards and
guidelines – permitted to commission, ground, and label electrical circuitry, devices,
and systems.
• Operating personnel who is familiar with handling automation equipment and with the
contents of these operating instructions and the instructions in the operating manual
42/18-74 EN.
2 Manufacturer’s information
2.1 Delivery
When receiving the delivery please immediately check items and scope for damages and
completeness. The scope of delivery is stated in the shipping documents. If ordered, the
accessories (e.g. mounting material, pressure gauge block, filter regulator) are added to
the delivery as individual items. Check items and scope of the delivery by means of the
catalog numbers to see if types and quantities are in accordance with your order.
If the positioner is delivered already mounted to the actuator, the positioner, accessories,
and actuator are considered as a common delivery item.
A list of catalog numbers and details of the different versions and accessories can be
found in data sheet 10/18-0.23 EN.
2.2 CE compliance information
We declare that we are the manufacturer of the TZID-C110 positioner and that the prod-
uct conforms with the regulations listed below and meets the following requirements of
EC regulation 89/336/CEE as of May 1989:
Basic technical standards/product standards
RFI suppression EN 55022 as of May 1995
EN 50081-1 as of March 1993
EMI/RFI shielding EN 50082-1 as of March 1993
The TZID-C110 positioner meets the EC regulation for CE conformity.