ABB Symphony Harmony Series, Instruction, Page: 231 / 402

11 - 4 WBPEEUI240751C0
Cable Nomenclature
Cable Nomenclature
Tables 11-8 through 11-10 list cable nomenclature.
Table 11-6. Auxiliary Relay Assembly Nomenclature
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
P - H B - R L Y - _ _ _ _ _ _ _ _ Block Nomenclature
Block Type
1 0 0 _ _ _ _ _ Electromechanical relay assembly
1,2
2 0 0 _ _ _ _ _ Solid state relay assembly
1,3
Reserved for Future Use
0 0 0 0 0 Must be zeros
NOTES :
1. Available in screw termination base style only.
2. RLY-100 is packaged with eight DPDT (form C) electromechanical relays.
3. RLY-200 is packaged unpopulated. Solid state relays are ordered separately. Refer to Table
11-12 for part numbers.
Table 11-7. Blank Block Nomenclature
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
P - H B - B L K - 1 0 0 _ _ _ _ _ Block Nomenclature
1
Module/Base Option
0 0 1 _ _ Nonredundant base
0 0 2 _ _ Redundant base
1 0 0 _ _ Blank module
Reserved for Future Use
0 0 Must be zeros
NOTES :
1. Blank blocks maintain column air flow. They are only required in the middle of a column where air flow would be disrupted
with an empty column position. They are not required at the bottom of a column of blocks.
Table 11-8. DIO to RLY Cable Nomenclature
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
P - M K - H R M - R L Y 1 2 _ _ _ Cable Nomenclature
Cable Type
H _ _ PLTC rated for use in hazardous areas
S _ _ For use in nonhazardous areas
Cable Length
0 B 0.6 m (2 ft) - connects side-by-side DIO
and RLY
x x 01 to 60 for 1.0 to 60 m (3.3 to 200 ft)