ABB Symphony Harmony Series, Instruction, Page: 111 / 402

2 - 2 WBPEEUI240751C0
AIN-200
AIN-200
Isolated High Level Voltage, Low Level Voltage,
Thermocouple In
Analog input signals:
•
–10 to +10 VDC high level, differential.
•
–100 to +100 millivolt (DC) low level, differential.
•
Thermocouple (refer to Table 2-2 for types supported).
Temperature effect (0° to 70°C) ±0.005%/°C
Settling time for all 16 channels

(100% step change)
75 msec to 95% of final value
Update rate
3
All channels 40 times per second (25 msec)
Rejection (50-60 Hz)
Normal mode
Common mode –70 dB
–90 dB
Number of A-to-D converters 1
Full scale resolution 16 bit resolution for –10 to +10 VDC range
Fault currents per channel
4
(current mode)
Shorted transmitter
Shorted positive to ground
Each channel provides current limiting and automatic recovery
60 mA nominal (IFP/LFP)
100 mA nominal (RFP)
160 mA nominal (IFP/LFP)
BLP fuse (A and B) 1.6 A, 250 V, 5 x 20 mm, fast-acting, low break capacity
(IEC 127-2/II)
IFP/LFP fuse 3.15 A, 250 V, 5 x 20 mm, time-lag, medium break capacity
(IEC 127-2/VI)
Weight
Module
Nonredundant base
Redundant base 1.0 kg (2.2 lb)
1.3 kg (2.8 lb)
1.7 kg (3.9 lb)
NOTES :
1. All specification values are maximums unless stated otherwise.
2. Maximum error includes effects of nonlinearity, repeatability, hysteresis, noise, and quantization error.
3. This is the rate at which the block reads and updates values. The rate at which the values are actually read and become avail-
able to the system depends on the scan cycle of the controller.
4. Remote field powered I/O may need external protection.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Table 2-1. AIN-120 Specifications
(continued)
Property Characteristic/Value
1