ABB Symphony Harmony Series, Instruction, Page: 114 / 402

AIN-300
WBPEEUI240751C0 2 - 5
AIN-300
Isolated RTD In
The AIN-300 block interfaces three-wire RTD analog input sig-
nals. It supports 16 isolated input channels individually soft-
ware configurable for RTD type (refer to Table
2-4 for types
supported). The block supports redundant I/O electronics.
Full scale resolution 18 bit resolution for –10 to +10 VDC range or –100 to
+100 mVDC range
Fault currents per channel
4
(current mode)
Shorted transmitter
Shorted positive to ground
Each channel provides current limiting and automatic recovery
60 mA nominal (IFP/LFP)
100 mA nominal (RFP)
160 mA nominal (IFP/LFP)
BLP fuse (A and B) 1.6 A, 250 V, 5 x 20 mm, fast-acting, low break capacity
(IEC 127-2/II)
IFP/LFP fuse 3.15 A, 250 V, 5 x 20 mm, time-lag, medium break capacity
(IEC 127-2/VI)
Weight
Module
Nonredundant base
Redundant base 1.0 kg (2.2 lb)
1.2 kg (2.7 lb)
1.6 kg (3.4 lb)
NOTES :
1. All specification values are maximums unless stated otherwise.
2. Maximum error includes effects of nonlinearity, repeatability, hysteresis, noise, and quantization error.
3. This is the rate at which the block reads and updates values. The rate at which the values are actually read and become avail-
able to the system depends on the scan cycle of the controller.
4. Remote field powered I/O may need external protection.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Table 2-3. AIN-220 Specifications
(continued)
Property Characteristic/Value
1
Table 2-4. AIN-300 Specifications
Property Characteristic/Value
1
RTD types (3-wire) 10
Ω
copper
100
Ω
platinum: U.S. Lab. Standard
100
Ω
platinum: U.S. Industry Standard
100
Ω
platinum: European Standard
120
Ω
nickel
Chinese 53
Ω
copper
Channels 16 isolated
Full scale range 500
Ω