Advanced Videographic Recorder
SM2000
4 CONFIGURATION
46
IM/SM2000
Issue 11
Fig. 4.1 Accessing the Configuration Level
Note.
1. If 'New Configuration' or 'Open a Configuration' is selected and the modified configuration file is saved later as the current
configuration, new internal data files for all enabled recording channels are created and any unarchived data is lost.
2. The option to load or retain the security configuration applies only to Advanced Security mode and is available only to the
System Administrator (User 1). If a new or existing configuration file is opened by a user other than the System
Administrator, the instrument's existing security settings are retained.
Edit the current configuration. Changes are not implemented
until saved on exit from the Configuration level
Cancel and
return to the
operator level
Check this box to
stop recording
while in the
configuration
mode
The existing security configuration parameters are
retained (i.e. the security configuration remains as
currently configured) when a configuration is opened
from file or when a new configuration is loaded.
Check 'Load security configuration from file' to
overwrite the current security configuration with
data from the file to be loaded see
Note 2
below.
Valid Password
Entered
Invalid Password
Entered
Switch between
internal and
external storage.
Note.
Do not use sharp objects such as screwdrivers, pen
nibs etc. to operate the touch screen.
Displayed only if 'Security
system' parameter is set to
'Basic' – see
Section 4.4.4, page 56
Displayed only if 'Security
system' parameter is set to
'Advanced' – see
Section 4.4.4, page 56
Configuration Level
Protected
Configuration Level
Unprotected
Open a configuration saved previously to internal or external
storage (up to 16 configurations can be stored in internal
memory) – see
Note 1
below. Alternatively, open one of the
QuickStart templates – see Appendix D, page 123.
Open a new configuration with
the default settings detailed in
Appendix D, page 123 – see
Note
1
below
