ABB Relion 670 series, Manual

Page: 326 / 366

DO name DO type DA name FC T Signal Mon/C
md
Description
SeqA b_dSEQ
db CF - 3I0DbRepInt - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
db CF - I2DbRepInt - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
db CF - I1DbRepInt - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
7.9.4.2 Voltage sequence measurement VMSQI
LN type LN prefix LN class Function block name
VMSQI (revision 3) V MSQI VMSQI
Table 233: VMSQI Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter
Oper.origin.orCat CO - Mod Cmd Mode parameter
Oper.origin.orIdent CO - Mod Cmd Mode parameter
Oper.ctlNum CO - Mod Cmd Mode parameter
Oper.T CO - Mod Cmd Mode parameter
Oper.Test CO - Mod Cmd Mode parameter
Oper.Check CO - Mod Cmd Mode parameter
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter for
61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter
q ST - Beh Mon Quality: Behaviour parameter
t ST - Beh Mon Timestamp: Behaviour parameter
SeqV b_dSEQ rangeC.hhLim.f CF - 3U0HiHiLim - High High limit in % of UBase
rangeC.hLim.f CF - 3U0HiLim - High limit in % of UBase
rangeC.lLim.f CF - 3U0LowLim - Low limit in % of UBase
rangeC.llLim.f CF - 3U0LowLowLim - Low Low limit in % of UBase
rangeC.max.f CF - 3U0Max - Maximum value in % of UBase
rangeC.min.f CF - 3U0Min - Minimum value in % of UBase
cVal.mag.f MX - 3U0 Mon 3U0 Amplitude, magnitude of
reported value
rangeC.hhLim.f CF - U1HiHiLim - High High limit in % of UBase
rangeC.hLim.f CF - U1HiLim - High limit in % of UBase
rangeC.lLim.f CF - U1LowLim - Low limit in % of UBase
Table continues on next page
Section 7
1MRK 511 349-UEN -
Logical node data model
320 670 series 2.1 IEC
Communication protocol manual