ABB Relion 670 series, Manual

Page: 230 / 366

DO name DO type DA name FC T Signal Mon/C
md
Description
OpAUn v2_dACT
t ST - TRIPUC Mon Timestamp: Trip signal from
under-current feature
TmpPct v2_dMV mag.f MX - THETA Mon Overload in percent of set trip level
(i.e. Trip=100%)
q MX - THETA Mon Quality: Overload in percent of set
trip level (i.e. Trip=100%)
t MX - THETA Mon Timestamp: Overload in percent of
set trip level (i.e. Trip=100%)
7.5.17.5 Stator overload protection GSPTTR
LN type LN prefix LN class Function block name
GSPTTR (revision 1) GS PTTR GSPTTR
Table 148: GSPTTR Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter for 61850
Oper.origin.orCat CO - Mod Cmd Mode parameter for 61850
Oper.origin.orIdent CO - Mod Cmd Mode parameter for 61850
Oper.ctlNum CO - Mod Cmd Mode parameter for 61850
Oper.T CO - Mod Cmd Mode parameter for 61850
Oper.Test CO - Mod Cmd Mode parameter for 61850
Oper.Check CO - Mod Cmd Mode parameter for 61850
stVal ST - - Mon Mode status value parameter for
61850
q ST - - Mon Quality: Mode status value
parameter for 61850
t ST - - Mon Timestamp: Mode status value
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Quality: Behaviour parameter for
61850
t ST - Beh Mon Timestamp: Behaviour parameter
for 61850
Str b_dACD general ST - START Mon General start signal from the
function
q ST - START Mon Quality: General start signal from
the function
t ST - START Mon Timestamp: General start signal
from the function
Op b_dACT general ST T TRIP Mon General trip signal from the
function
Table continues on next page
Section 7
1MRK 511 349-UEN -
Logical node data model
224 670 series 2.1 IEC
Communication protocol manual