ABB Relion 670 series, Manual

Page: 320 / 366

DO name DO type DA name FC T Signal Mon/C
md
Description
A k_dWYE
q MX - IL2 Mon Quality: IL2 Amplitude, magnitude
of reported value
q MX - IL1 Mon Quality: IL1 Amplitude, magnitude
of reported value
t MX - IL1 Mon Timestamp: IL1 Amplitude,
magnitude of reported value
t MX - IL2 Mon Timestamp: IL2 Amplitude,
magnitude of reported value
t MX - IL3 Mon Timestamp: IL3 Amplitude,
magnitude of reported value
subEna SV - - - Enable substitution
subEna SV - - - Enable substitution
subEna SV - - - Enable substitution
db CF - IL3DbRepInt - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
db CF - IL1DbRepInt - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
db CF - IL2DbRepInt - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
zeroDb CF - IL1ZeroDb - Zero point clamping
zeroDb CF - IL3ZeroDb - Zero point clamping
zeroDb CF - IL2ZeroDb - Zero point clamping
7.9.3.2 Phase-phase voltage measurement VMMXU
LN type LN prefix LN class Function block name
VMMXU (revision 1) V MMXU VMMXU
Table 230: VMMXU Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
PPV a_dDEL rangeC.hhLim.f CF - UL12HiHiLim - High High limit in % of UBase
rangeC.hLim.f CF - UL12HiLim - High limit in % of UBase
rangeC.lLim.f CF - UL12LowLim - Low limit in % of UBase
rangeC.llLim.f CF - UL12LowLowLim - Low Low limit in % of UBase
rangeC.max.f CF - UL12Max - Maximum value in % of UBase
rangeC.min.f CF - UL12Min - Minimum value in in % of UBase
cVal.mag.f MX - UL12 Mon UL12 Amplitude, magnitude of
reported value
rangeC.hhLim.f CF - UL23HiHiLim - High High limit in % of UBase
rangeC.hLim.f CF - UL23HiLim - High limit in % of UBase
rangeC.lLim.f CF - UL23LowLim - Low limit in % of UBase
Table continues on next page
Section 7
1MRK 511 349-UEN -
Logical node data model
314 670 series 2.1 IEC
Communication protocol manual