ABB NETA-21, User Manual

Page: 70 / 196

70 Devices
•
Navigate button opens the front page of a selected device. This button is disabled if
no device has been selected. If you click the arrow on the button and select
Parameters or Events , you can go directly to the Parameter browser tab or the
Event tab of the selected device.
•
Device list shows all detected devices. Double-click a device to open the front page of
the device. The list contains the following columns:
•
Name column contains the name and icon of the device.
After the device name there are two numbers in curly brackets. The first number
depends on the connection type:
0 = DDCS connection
1 or 2 = PNL connection
3 = Modbus connection
Ethernet connection = IP of the device without dots.
The second number is an ID that indicates different devices of the same
connection.
•
Category column contains the category of the device.
•
Type column contains the type of the device.
•
Status column contains the connection status of the device and the corresponding
icon describing the status. The status can be, for example, one of the following:
Normal, Disconnected, Warning, Fault.
•
Connection type column contains the connection type of the device. The following
connection types are available:
DDCS
ETH scan, ETH manual (Ethernet connection, either automatically scanned or
manually connected)
MB (Modbus)
Panel bus.