KNX Technical Reference Manual
ABB i-Bus
®
KNX Yucus
48
can also be alternatingly set for a rising edge, i.e. after Value 1 was sent (or received), a
renewed operation will send out Value 2. After it is operate again, Value 1 is again sent
out. The values 1 and 2 are specify via the parameters "Value 1" and "Value 2".
The "No reaction" setting causes no telegram to be sent out for a operation of the button.
12.11.7
Extended parameter – Value 1 for failing edge
Options
–
1 bit
: On/Off
–
1 byte 0 - 100%:
(0%-100%)
–
1 byte 0 - 255
: 0 to 255
–
2-byte float
: -671088.64 to 671088.64
–
2-byte signed
: -32768 to +32767
–
2-byte unsigned
: 0 to 65,535
–
4-byte float
: -4000000 to 4000000
–
4-byte signed:
-2147483648 to 2147483647
Note”: This parameter is only visible if the "Reaction at failing edge" parameter
is set on either "Value 1" or "Alternating Value1/Value2". The options are dependent on
the setting of the "Object type for failing edge" parameter.
Value 1 options are dependent on the setting of the "Object type for failing edge"
parameter.
–
1 bit
: switching functions (e.g. On/Off, enable/blocked, true/untrue)
–
1 byte 0 - 100%:
percentage values (0 = 0%, 255 = 100%)
–
1 byte 0 - 255
: arbitrary values from 0 to 255
–
2-byte float
: floating point value (physical values such as temperature or brightness) -
671088.64 to 671088.64
–
2-byte signed
: arbitrary values from -32768 to +32767
–
2-byte unsigned
: arbitrary values from 0 to 65,535
–
4-byte float
: floating point value (physical values) -4000000 to 4000000
–
4-byte signed:
arbitrary values from -2147483648 to 2147483647
–
4-byte unsigned
: arbitrary values from 0 to 4294967295
12.11.8
Extended parameter – Value 2 for failing edge
Options
–
1 bit
: On/Off
–
1 byte 0 - 100%:
(0%-100%)
–
1 byte 0 - 255
: 0 to 255
–
2-byte float
: -671088.64 to 671088.64
–
2-byte signed
: -32768 to +32767
–
2-byte unsigned
: 0 to 65,535
–
4-byte float
: -4000000 to 4000000
–
4-byte signed:
-2147483648 to 2147483647
