KNX Technical Reference Manual
ABB i-Bus
®
KNX Yucus
33
–
4-byte float
: floating point value (physical values) -4000000 to 4000000
–
4-byte signed:
arbitrary values from -2147483648 to 2147483647
–
4-byte unsigned
: arbitrary values from 0 to 4294967295
–
Number of light scene 1..64
: arbitrary values from 1 to 64
Note: This parameter is only visible if “Primary Function” is activated.
12.4.7 Common parameter – Value
Options
–
1 bit
: On/Off
–
1 byte 0 - 100%:
(0%-100%)
–
1 byte 0 - 255
: 0 to 255
–
2-byte float
: -671088.64 to 671088.64
–
2-byte signed
: -32768 to +32767
–
2-byte unsigned
: 0 to 65,535
–
4-byte float
: -4000000 to 4000000
–
4-byte signed:
-2147483648 to 2147483647
–
4-byte unsigned
: 0 to 4294967295
–
Number of light scene 1..64
: 1 to 64
This parameter is used to specify the type of communication object data type size to be
send out by primary function when it is trigger.
Note: This parameter is only visible if “Primary Function” is activated.
12.4.8 Common parameter – Send “off” telegram automatic after delay time expire
Options
Deactivate
Activate
This parameter is used to specify whether to send an off command after the primary
function is trigger.
Note: This parameter is only visible if “Primary Function” is activated.
12.4.9 Common parameter – Delay time after activating energy saving mode to trigger
“Off” command (sec)
Options
Input from 0 sec to 1800 sec
