ABB i-bus KNX 6108/06-500 Technical Reference Manual Download

Page: 8 / 103

Safety

KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905

│8

Safety

The device has been constructed according to the latest valid regulations governing technology
and is operationally reliable. It has been tested and left the factory in a technically safe and
reliable state.

However, residual hazards remain. Read and adhere to the safety instructions to prevent
hazards of this kind.

ABB accepts no liability for any failure to observe the safety instructions.

2.1

Information and symbols used

The following Instructions point to particular hazards involved in the use of the device or provide
practical instructions.

Danger

Risk of death / serious damage to health
– The respective warning symbol in connection with the signal word "Danger"

indicates an imminently threatening danger which leads to death or serious
(irreversible) injuries.

Warning

Serious damage to health
– The respective warning symbol in connection with the signal word "Warning"

indicates a threatening danger which can lead to death or serious
(irreversible) injuries.

Caution

Damage to health
– The respective warning symbol in connection with the signal word "Caution"

indicates a danger which can lead to minor (irreversible) injuries.

Attention

Damage to property
– This symbol in connection with the signal word "Attention" indicates a

situation which could cause damage to the product itself or to objects in its
surroundings.

NOTE

This symbol in connection with the word "Note" indicates useful tips and
recommendations for the efficient handling of the product.

The following safety symbols are used in the operating manual.

This symbol alerts to electric voltage.

Summary of Contents for i-bus KNX 6108/06-500








































































































Search results

Summary of Contents for i-bus KNX 6108/06-500

Reviews:

Related manuals for i-bus KNX 6108/06-500

Brands by name

Popular brands

ABB i-bus KNX 6108/06-500, Technical Reference Manual

Search results

Summary of Contents for i-bus KNX 6108/06-500

Reviews:

Related manuals for i-bus KNX 6108/06-500

Brands by name

Popular brands