ABB i-bus KNX 6108/06-500 Technical Reference Manual Download | Manualshive

Page: 43 / 103

background image

Description of application and parameters

Application "1-button value transmitter, 2 objects"

KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905

│43

10.8.3 Extended parameters - Reaction on rising edge

Options:

No reaction

Value 1

Value 2

Alternating value1/value2

The application can differentiate between the operation and the releasing of the button. An
operation is designated as "Rising edge" and the releasing is designated as "Falling edge".

The application "1-button value transmitter, 2 objects" makes two separate "Switching"
communication objects available for the left or right side of the button. The value 1 is always
sent out on the first object (Value 1) and the value 2 is always sent out on the second object
(Value 2).

The "Reaction to rising edge" parameter specifies whether the "Value 1 for rising edge" or the
"Value 2 for rising edge" is sent out for rising edge.

Alternatively, Value1/Value2 can also be alternatingly set for a rising edge, i.e. after Value 1
was sent (or received), a renewed operation will send out Value 2. After it is operated again,
Value 1 is again sent out.

The values 1 and 2 are specified via the parameters "Value 1" and "Value 2".

The "No reaction" setting causes no telegram to be sent out for a operation of the button.

10.8.4 Extended parameters - Reaction on falling edge

Options:

No reaction

Value 1

Value 2

Alternating value1/value2

The application can differentiate between the operation and the releasing of the button. An
operation is designated as "Rising edge" and the releasing is designated as "Falling edge".

The application "1-button value transmitter, 2 objects" makes two separate "Switching"
communication objects available for the left or right side of the button. The value 1 is always
sent out on the first object (Value 1) and the value 2 is always sent out on the second object
(Value 2).

The "Reaction to falling edge" parameter specifies whether the "Value 1 for falling edge" or the
"Value 2 for falling edge" is sent out for falling edge.

Alternatively, Value1/Value2 can also be alternatingly set for a rising edge, i.e. after Value 1
was sent (or received), a renewed operation will send out Value 2. After it is operated again,
Value 1 is again sent out.

The values 1 and 2 are specified via the parameters "Value 1" and "Value 2".

The "No reaction" setting causes no telegram to be sent out for a operation of the button.

«
...
41
42
43
44
45
...
»

Summary of Contents for i-bus KNX 6108/06-500








































































































Reviews:

No comments

Related manuals for i-bus KNX 6108/06-500

Brand: OMCA Pages: 36

BTL7-A/E501-M Series

Brand: Balluff Pages: 194

Brand: ABB Pages: 2

WELDPLAST 200-i

Brand: Leister Pages: 20

Brand: MIMAKI Pages: 44

Brand: Inmes Pages: 12

NEX Formulation Tank

Brand: GC Water Pages: 17

Brand: CAB Pages: 42

Brand: WDT Pages: 44

Brand: Parker Pages: 50

Brand: Eaton Pages: 2

7x7 NG Plus 4 Series

Brand: Monosem Pages: 94

Brand: C-COM Satellite Systems Pages: 68

Brand: NEMIQ Pages: 12

Brand: ABB Pages: 32

Protecta Power IV

Brand: ABB Pages: 28

HVC-PU 150 Overnight

Brand: ABB Pages: 34

Relion 650 1.1 IEC

Brand: ABB Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands