ABB i-bus KNX 6108/06-500 Technical Reference Manual Download Page 68 | Manualshive

Page: 68 / 103

background image

Description of application and parameters

application - "2-button value dimming sensor"

KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905

│68

10.17

application - "2-button value dimming sensor"

NOTE

The application is valid for the following parts of the device:

■

Button 1 / rocker 1

■

Button 3 / rocker 2

With the "2-button value dimming sensor" application it is possible to send 1-byte value
telegrams via an operation of the rocker.

Each operation of the left or right side of the rocker will increase or reduce a 1-byte value
(percent or value from 0 to 255). The 1-byte value can be connected with 1-byte brightness
value objects of dimming actuators. This allows a dimming actuator to be dimmed brighter or
darker with the rocker via value telegrams.

10.17.1 General parameters - Object type

Options:

1 byte 0 - 100%

1 byte (0 - 255)

The 1-byte communication object "Value" is set via the "Object type" parameter. With the setting
"1 byte 0..100%", the momentary value is increased or reduced by a percentage amount for
every operation. With the setting "1 byte 0..255", the momentary value is increased or reduced
by an absolute value for every operation.

How large the percentage value or the absolute value will be is specified via the "Step size"
parameter.

10.17.2 General parameters - Step size

NOTE

The options are dependent on the setting of the "Object type" parameter.

Options:

1 … 50 %

1 … 128

1 byte 0 - 100%

: The size by which the momentary value is to be increased or reduced for an

operation is set via the "Step size" parameter. A percentage value can be specified.

Example: The current value on the 1-byte communication object "Value" amounts to 40%. For a
step size of "10%", the current value is increased from 40% to 50% for an operation (for an
increase).

1 byte 0 - 255:

The size by which the momentary value is to be increased or reduced for an

operation is set via the "Step size" parameter. An absolute value from 1 to 128 can be specified.

Example: The current value on the 1-byte communication object "Value" amounts to 100. For a
step size of "20", the current value is increased from 100 to 120 for an operation (for an
increase).

«
...
66
67
68
69
70
...
»

Summary of Contents for i-bus KNX 6108/06-500








































































































Reviews:

No comments

Related manuals for i-bus KNX 6108/06-500

Brand: C.E. Nierhoff & Co Pages: 7

Brand: Xycom Pages: 99

Brand: LNS Pages: 112

Brand: Cleveland Pages: 16

F100-H635.05 S11CAW2V

Brand: Jäger Pages: 44

Brand: M-system Pages: 8

Brand: Hauff-Technik Pages: 2

Brand: PLIDCO Pages: 15

Brand: Armorgard Pages: 8

Brand: Smart Dedicated Design Pages: 6

Brand: ANEMOI Pages: 19

Brand: SCHUNK Pages: 12

Concrete Forklift Skip 500

Brand: Conquip Pages: 7

Z80-H536.08 S8RVW3

Brand: Jäger Pages: 48

Brand: Ingersoll-Rand Pages: 12

INNOTECH BEF 401-10

Brand: Innotech Pages: 2

Z45-D160.02 S15AY

Brand: Jäger Pages: 40

Brand: OEZ Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands