Description of application and parameters
Application "LED function"
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
│79
10.19.14 Extended parameters - Day/Night mode
Options:
Deactivated
Activated
The LED can light up with two different brightness levels.
When an ON telegram is received, the LED lights up "bright"; when an OFF telegram is
received, the LED lights up "dark".
NOTE
If the operating mode of the LED is set to status illumination, the Day/Night
mode object can also be used for the status display.
Example: The button was assigned with the application "1-button switching" and connected with
a switching actuator that switches a lamp group. The LED of the button is parameterised to
"Status illumination" and the colour set to "yellow" so that the user is signalled that the button
triggers a light function. If the Day/Night mode object is now connected with the status response
object of the switching actuator via a group address/action, the LED lights up bright when the
light is switched on. The LED lights up dark if the light is switched off.
10.19.15 Extended parameters - Light scene memory function
Options:
Deactivated
Activated
If a scene storage telegram is received on the 1-byte communication object "Scene storage",
the LED will blink for 3 s and then stop blinking automatically. The LED always flashes in the
same colour and brightness that is specified via the status function or function display.
NOTE
If the LED is currently serving as an orientation light, it will not blink. This also
applies if orientation illumination is switched to during the flashing.