ABB i-bus KNX 6108/06-500 Technical Reference Manual Download | Manualshive

Page: 61 / 103

background image

Description of application and parameters

Application "2-button dimming"

KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905

│61

10.14.3 Extended parameters - Working mode of the buttons for switching

Options:

1st button off / 2nd button on

1st button on / 2nd button off

Alternating on/off

The "Working mode of the button for switching" application determines whether switching on or
switching off occurs via the right or the left side of the button. Using the behaviour "Alternating
on/off" always switches between ON and OFF. That means, for example, if an ON telegram was
last sent out, then a renewed operation of the rocker switch will trigger an OFF telegram. If the
button is operated again, an ON telegram will be sent again, etc. The button thus always
remembers the last state and then switches over to the other value.

This also applies for values that are received via the associated 1-bit communication object.
This means that if an ON telegram was sent out for the last button operation, thereafter an OFF
telegram was received via the communication object, the next operation of the button will send
out an ON telegram. It must be observed here that the S-flag (writing) of the communication
object is activated.

10.14.4 Extended parameters - Working mode of the buttons for dimming

Options:

1st button brighter / 2nd button darker

1st button darker / 2nd button brighter

The "Working mode of the button for dimming" determines whether operation of the left or right
side of the button will send out a dim brighter or a dim darker telegram.

If a dimming telegram is triggered by operation of the button, a dimming telegram will be sent
out on the 4-bit communication object "Relative dimming".

«
...
59
60
61
62
63
...
»

Summary of Contents for i-bus KNX 6108/06-500








































































































Reviews:

No comments

Related manuals for i-bus KNX 6108/06-500

Brand: Olympus Pages: 50

Brand: VAHVA Pages: 19

Brand: ABB Pages: 4

Brand: Dodge Pages: 2

Kleiss MCS60-38

Brand: MAINLINE Pages: 49

Brand: Falcon Pages: 8

Brand: Hoffmann Pages: 33

Brand: Daymak Pages: 27

Brand: SR Scales Pages: 12

Brand: Vimar Pages: 6

Brand: Park Tool Pages: 4

Brand: Eaton Pages: 28

Hornet XL ASW31401

Brand: McElroy Pages: 34

Brand: IXSEA Pages: 21

Brand: Bitzer Pages: 100

Brand: Eaton Pages: 11

Brand: Eaton Pages: 104

Brand: Greenheck Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands