6.2 INSERTING THE MODULES ON THE PRINTER
1)
Place a plate on the feeding table and align the edge with the cleaning brush.
2)
Adjust the width guides to the plate sides.
NOTICE
Printing on a plate that has burrs on its edges can cause printing problems and can damage the print
head. Also, metallic particles adhering to a plate can damage the print head, so handle and store plates
carefully. Damage to the print head caused by printing on dirty plates is not covered under the warranty.
Printing on plates that have dirt or grease (including skin oils) on the surface will result in poor print
quality
When aligning the width guides with the width of the plate, align the leading edge of the plate with the
cleaner brush. If you push the leading edge of the plate into the feed opening, the printer Automatically
takes up the plate and positions it for printing
Auxiliary tray
Plate edge
Guides well aligned
with the Plate
Item to
Print ON
Summary of Contents for HTP500
Page 1: ...User guide HTP500 V2 Thermal transfer printer ...
Page 12: ......
Page 66: ...1SNC160010M0202 10 2012 ...