7.4.2 OTHER PARTS TO CLEAN
Before using the printer check it and clean it as described below.
Print head
Clean the print head using a blower, soft cloth, cotton swab or cleaning paper. Remove
accumulated dusts. Be careful not to scratch the print head.
Roller
Use a soft cloth to clean the roller wiping dirt and oil off.
7.4.3 SPARE PARTS
Cleaning roller
The printer is equipped with a cleaning cassette that helps to maintain the cleaning roller
effectiveness.
7.5 CLEANING AND STORING PLATES
CLEANING PLATES
Static electricity on the plates surface, attracts paper residue from packaging, airborne dust
and dirt. Printing on such plates without cleaning them first, may cause poor print results and
may even scratch the print head.
1) Remove any eventual burr you may find on the plate edges.
2) Clean both sides of the plate. Use a soft, damp cloth and then thoroughly wrung out to
wipe away finger prints and grease. Make sure the plate is completely dry before loading it in
the printer.
STORING PLATES
The way plates are stored effects their surface and the print quality.
manually as illustrated above.
Don’t scratch the cleaning roller. After the cleaning, let the roller dry completely before inserting it
back into the printer.
The cleaning roller is a consumable part so, once is worn up, replace it with a new one.
Replace the cleaning roller at least once a year.
CAUTION
Don’t scratch the print head.
Don’t clean the print head using cloths that have metallic particles adhering to them.
If the print head is scratched this can’t print anymore in the scratch zone.
When cleaning the print head be careful.
Summary of Contents for HTP500
Page 1: ...User guide HTP500 V2 Thermal transfer printer ...
Page 12: ......
Page 66: ...1SNC160010M0202 10 2012 ...