And afterwards the following message
Bring
the “Support Plate TB” with a module of T-Block tags positioned on and insert it
carefully till the printer makes a beep.
The printer detects the
“Support Plate TB” and moves it in the correct HOME position ready
for the print.
Be sure that the ONLINE light is turned on and that HTP500 V2 is in ONLINE mode.
5.4 PRINT ON TERMINAL BLOCK TAGS TB SERIES
Run the printing from software
HTS500
.
Press push Button
New Job.
Select the Item to Print
MC512
.
Press the Button
New
from the Generator Window.
Insert the data to print.
Press push button
Confirm
.
Press push button
Close
.
Press push button
Run
.
Press push button
.
Press push button of the Device/Printer
Terminal Blocks
.
6 -
PRINTS OF PVC TAGS and METHACRYLATE TAGS in “NONE” and
“ACRYL Mode”
This explain how to print in manual modality the tags and strips with HTP500 V2 easily and
quickly.
All needs to be done is to position correctly the items to be printed on the printer following
carefully the instructions here follow.
6.1 Preparing the printer
6.2 Inserting the Modules in the Printer
6.3 Turning on the Printer
6.4 Print on tags and strips
6.1 PREPARING THE PRINTER
To load an item perform the steps shown below.
Open the tray pulling the auxiliary tray as shown in the picture below.
REMIND
When the
“Support Plate TB”
is in the correct HOME position, if you don’t print with the PC in 5
minutes, the printer Automatically moves the
“Support Plate TB”
from the home position.
PRINT READY..
SINGLE SBLACK
Summary of Contents for HTP500
Page 1: ...User guide HTP500 V2 Thermal transfer printer ...
Page 12: ......
Page 66: ...1SNC160010M0202 10 2012 ...