And afterwards the following message
Take the “Support Plate” carefully and insert it beneath the “Card Store” till the mobile part is
just under the “Card Store”
The printer detects the
“Support Plate” and moves it in the correct HOME position READY for
the Print.
Be sure that the ONLINE light is turned on and that the HTP500 V2 is in ONLINE mode.
4.5 PRINT ON CABLE TAGS
Run the printing from software
HTS500
.
Press push Button
New Job.
Select the Item to Print
WM12 (or another one if you bought some others)
Press the Button
New
from the Generator Window.
Insert the data to print.
Press push button
Confirm
.
Press push button
Close
.
Press push button
Run
.
Press push button
.
Press push button of the Device/Printer
“
AUTOMATIC CABLES
”
REMIND
When the
“Support Plate” is in the correct HOME position, if you don’t print with the PC in 5
minutes, the printer Automatically moves the
“Support Plate” from the home position.
PLEASE WAIT…
VERSION X.X
PRINT READY..
STACK SBLACK
Summary of Contents for HTP500
Page 1: ...User guide HTP500 V2 Thermal transfer printer ...
Page 12: ......
Page 66: ...1SNC160010M0202 10 2012 ...