a.8.2) After the item description in the parentheses there is the reference measure of
the printed area (220 mm):
a.8.3) In the X field type in the value in millimetre of the print step really printed.
a.8.4) In our example: if the SI2K201 is the selected one, the print area is 220mm
a.8.5) If the printer prints 3 mm shorter, insert in the X field the value 220-3= 217mm.
a.8.6) HTS500Hip makes a correction for each print of 217mm and expand it at
220mm.
a.8.7) This correction value works for all the items of that device.
Look at a calibration example for the Vertical axis with the SI2K02W/15 item for the Feeder.
a.9) Run the HTS500Hip
a.10) Create a Single-item job
a.11 Insert some texts (HHHHHH) for all the item tags.
a.12 Verify the centering of the first and last tag
a.13) If the print is too short:
first top tag last bottom tag
d
the print step should be extended.
a.13.1) Measure of how many mm the print step is shorter (for example 3 mm). To obtain
the difference, the d1 distance between the left item edge and the first ‘H’ of the first tag will
be measured, and also will be measured the d2 distance between the left edge item and the
first ‘H’ of the last tag; so the difference will be: d1-d2=3mm
a.14
) Select ‘File’, Select ‘Plotter Setup’
a.15) Select the centering button (the second of the three buttons for each device):
a.16) In the window on the left bottom side there is the calibration part:
a.16.1) Select for the Y axis the SI2K02W/15 reference item
a.16.2) After the item description in the parentheses there is the reference measure of
the printed area (85 mm).
a.16.3) In the Y field type in the value in millimetre of the print step really printed.
a.16.4) In our example: if the SI2K02/15 is the selected one, the print area is 85mm
a.16.5) If the printer prints 3mm shorter, insert in the Y field the value 85-3=82mm
a.16.6) HTS500Hip makes a correction for each print of 82 mm and expand it at
85mm.
This correction value works for all the items of that device.
3.7 PRINTER DRIVER UNINSTALL
Important:
The Printer must not be connected to the Personal Computer.
Unplug the USB cable from the printer.
To uninstall the Driver:
Select the HTS500 Software
CD
Select the Folder \
Drivers
Select the Folder \
HTP500 V2
Execute
Setup.exe
HHHHHH
HHHHHH
D1
D2
Summary of Contents for HTP500
Page 1: ...User guide HTP500 V2 Thermal transfer printer ...
Page 12: ......
Page 66: ...1SNC160010M0202 10 2012 ...